Toro TX 1000 Compact Tool Carrier, Operator'S Manual

Page: 14 / 60

Message Display
Engine-Coolant-Temperature Light
If the engine coolant becomes too hot, the light on
the left flashes and the horn sounds (
Figure 15 ). If
this happens, disengage the auxiliary hydraulics and
let the machine run at high idle to allow the cooling
system to cool the machine. Check the coolant level
when the engine has fully cooled.
Important:
Do not shut off the engine, as this
may cause the machine to overheat.
g029666
Figure 15
Engine-Oil-Pressure Light
If the engine-oil-pressure becomes too low, the light
on the left illuminates steadily (
Figure 16 ). If this
happens, shut off the engine immediately and check
the oil level. If it is low, add oil and look for possible
leaks.
g029665
Figure 16
Glow-Plug Light
The light on the right flashes while the glow plugs are
charged and warming the engine (
Figure 17 ).
g029668
Figure 17
Battery-Charge Light
If the battery charge becomes too low, the light on the
right illuminates steadily (
Figure 18 ). If this happens,
shut off the engine and charge or replace the battery.
Refer to
Servicing the Battery (page 34) .
g029667
Figure 18
Hour Meter
The hour meter displays the number of hours of
operation that have been logged on the traction unit
and the following indicators:
•
Engine start—displays when you start the engine
g029974
Figure 19
•
Parking brake—displays when you disengage the
parking brake
g030520
Figure 20
•
Traction neutral—displays when the traction
control is in the N
EUTRAL
position
g029211
Figure 21
•
Auxiliary lever neutral—displays when the auxiliary
lever is in the N
EUTRAL
position
g029975
Figure 22
14