g342220
Figure 134
Front Hoop
g342222
Figure 135
Right, Rear Hoop
g342221
Figure 136
Left, Rear Hoop
Hauling the Machine
WARNING
Driving the machine on street or roadway
without turn signals, lights, reflective
markings, or a slow-moving vehicle emblem is
dangerous and can lead to accidents causing
personal injury.
Do not operate the machine on a public street
or roadway.
Important:
Use full-width ramps for loading the
machine onto a trailer or truck.
1.
Load the machine onto the trailer or truck (coring
head forward—preferred).
2.
Fully raise and latch the handlebar to engage
the parking brake, shut off the engine, remove
the key, and wait for all moving parts to stop.
3.
Secure the coring head with the service latch;
refer to
Supporting the Coring Head with the
Service Latch (page 50)
.
4.
Close the fuel-shutoff valve; refer to
.
5.
At the tie-down points, bind the machine to the
trailer or truck with cables, chains, or straps;
refer to
Tie-Down Points (page 61)
.
Trailer Recommendations
Weight
745 kg (1,642 lb) or 829 kg
(1,827 lb) with 2 optional
weights
Width
130 cm (51 inches) minimum
Length
267 cm (105 inches) minimum
Ramp Angle
3.5/12 pitch (16°) maximum
Load Direction
Coring head forward
(preferred)
Vehicle Tow Capacity
Greater than gross trailer
weight (GTW)
62
Summary of Contents for 09960
Page 89: ...Notes...