Toro 09960, Operator'S Manual, Page: 35 / 92

g372375
Figure 58
6. Press the left InfoCenter button to save your
setting and exit the Set Hole Spacing screen.
7. Rotate the ignition key to the O
FF
position.
Setting the Tines Quantity
1. Ensure that the coring head is raised; refer to
Raising the Coring Head (page 27) .
2. Rotate the ignition key to the R
UN
position.
g358601
Figure 59
3. Press the right InfoCenter button until the Setting
the Tine Quantity screen displays (
Figure 60 ).
g372378
Figure 60
4. Press the center button to select the Set
Quantity option.
Note:
The Set Quantity screen displays.
5. Adjust the tine quantity ( Figure 61 ) as follows:
Important:
The tine quantity is the number
of tines of 1 holder.
•
Press the InfoCenter center button to
decrease tine quantity.
•
Press the right button to increase tine
quantity.
g372376
Figure 61
6. Press the left InfoCenter button to save your
setting and exit the Set Hole Spacing screen.
7. Rotate the ignition key to the O
FF
position.
35