Toro 09960, Operator'S Manual, Page: 19 / 92

Product Overview
g338270
Figure 19
1. Fuel tank 4. Handlebar 7. Right side
2. Left side 5. Line marker
3. Forward (operating direction) 6. Coring head
Controls
Handlebar Controls
g339456
Figure 20
1. Handle-bar latch 3. InfoCenter
2. Operator presence bail
4. Bump-stop switch
Handle-Bar Latch
Use the handle-bar latch ( Figure 20 ) to secure the
handlebar in the upward position and to engage the
parking brake.
Important:
Secure the handlebar in the up
position anytime you leave the operator’s position.
Operator-Presence Bail
The operator-presence bail ( Figure 20 ) helps ensure
that you are in the operator’s position while driving the
machine or running the coring head.
Note:
Releasing the operator-presence bail does not
shut off the engine.
The InfoCenter
Use the InfoCenter ( Figure 20 ) to adjust how the
coring head controls work.
Bump-Stop Switch
If you contact the bump-stop switch ( Figure 20 ), the
machine performs the following actions:
•
The machine stops driving forward.
•
The coring head raises and stops running.
Note:
Contacting the bump-stop switch does not
shut off the engine. You can drive the machine in the
reverse direction, but you must reset the bump switch
to drive forward.
19