
5.
To disengage the speed lock operation, perform
one of the following:
•
Press the speed-lock switch to the O
FF
position.
•
Rotate the top of the traction control rearward
to drive the machine backward.
•
Release the operator presence bail.
•
Press the bump-stop switch.
Using the Ground-Speed Lock
Aerate Mode
Note:
The ground-speed lock is not available when
aerating in the immediate-drop mode.
1.
Press the transport/aerate switch is in the
A
ERATE
position (
).
g358598
Figure 81
1.
Speed-lock switch
5.
Operator presence bail
2.
O
N
position (speed-lock
switch)
6.
Aerate bail
3.
O
FF
position (speed-lock
switch)
7.
Traction control
4.
Transport/aeration switch
(A
ERATE
position)
8.
Bump-stop switch
2.
Press the speed-lock switch to the O
N
position.
3.
Drive the machine forward and close the aerate
bail.
Note:
The ground-speed lock engages, and the
coring head lowers.
4.
At the end of the aeration pass, release the
aerate bail.
Note:
The coring head raises, but the machine
maintains ground speed at the aeration hole
spacing rate.
5.
To disengage the speed lock operation, perform
one of the following:
•
Press the speed-lock switch to the O
FF
position.
•
Rotate the top of the traction control rearward
to drive the machine backward.
•
Release the operator presence bail.
•
Press the bump-stop switch.
Driving the Machine in the
Transport Mode
Note:
Use the transport mode when you move the
machine between job sites.
Note:
The machine drives at a reduced variable
speed anytime the transport/aeration switch is in the
A
ERATION
position.
1.
Start the engine, and move the throttle control
to the F
AST
position; refer to
(page 40)
.
2.
Lower the handlebar to release the parking
brake; refer to
(page 39)
.
3.
Press the left side of the transport/aeration
switch to the T
RANSPORT
position (
g339584
Figure 82
1.
Transport/aeration switch
(T
RANSPORT
position)
3.
Traction control
2.
Operator-presence bail
Note:
The InfoCenter displays the T
RANSPORT
icon (
).
42
Summary of Contents for 09960
Page 89: ...Notes...