Using the Bed Support
Important:
Always install or remove the bed
support from the outside of the bed.
1.
Raise the bed until the lift cylinders are fully
extended.
2.
Remove the bed support from the storage
brackets on the back of the ROPS panel (
g026142
Figure 21
1.
Bed support
3.
Push the bed support onto the cylinder rod, and
ensure that the support-end tabs rest on the
end of the cylinder barrel and cylinder-rod end
(
).
g009164
Figure 22
1.
Bed support
3.
Bed
2.
Cylinder barrel
4.
Remove the bed support from the cylinder, and
insert it into the brackets on the back of the
ROPS panel.
Important:
Do not try to lower the bed with
the bed-safety support on the cylinder.
34
Summary of Contents for 07385TC Workman HDX-D
Page 39: ...g010359 Figure 32 39...
