- 23 -
If the system is set to the application this setting is
permanently saved in the default ram. This parameter set
can be accessed at any time. If the parameters were
changed in a way that the system is not working restoring
of this back-up parameter set with which the setting was
working before is possible.
The settings which are permanently saved in the flash are
loaded as setting parameters each time the topCam6500 is
switched on.
It is possible to save the data in the normal flash or in a default area which can be accessed in
case of an emergency.
The Windows programme does not support all options provided by the camera. The menu
item “
Kommandoeingabe
” (command entry) can be used for direct entry of commands which
can be decoded by the topCam 6500 or
selection of a new interface;
„
Komprimierte Datenübertragung
“ (Compressed data transmission): Here the data transfer
for the image data can be compressed so that a higher image frequency can be achieved.
The menu item
Download Firmware
allows downloading a new version of the firmware on
the topCam6500.
? Info offers information on the program, the version number of the software on the topCam
6500, the serial number and port of the topCam process interface = 2 diagnosis ports = 1
13.
The user interface topControllite
The Windows interface is an easy-to-use interface for resetting the counters, activating a
trigger, storing all settings in the code scanner into a file and restoring them from the file. It is
also possible to switch to the live image mode to display a live image on the monitor. This