- 19 -
Function window
If more than one evaluation windows
are active AND or OR interconnections
can be made.
If AND is selected all function
windows must have reached a
successful scanning for the successful
signal to be set. If OR is selected only
one function window must have
effected a successful scanning for a
successful signal to be set.
In addition triggering for every
individual window by means of the 2
trigger inputs is possible. Example: If 2
windows are active the different trigger
inputs can be used to initiate a
triggering. In the centre of the picture
below either trigger 1 or trigger 2 can
be selected. This allows realization of
different evaluations at two different
positions.
Interface settings
With selection of the tab
“
Schnittstelle
” (Interface) the
following settings are possible for
the process interface.
Process interface
Baud rate
Data bits
Parity
Stop bits
Trigger
Polarity
Trigger delay up to
2000 ms
Trigger string (start)
Trigger string (end)
Output signals
Polarity
Pulse length
Output time
