- 25 -
Loading the job
The settings are
transmitted to the
scanner.
If the bypass is activated it is
highlighted in red.
“
Trigger
” is used to start a
scanning.
“
Livebild
” (Live image) is
used to display the live
image on the monitor.
“
Zähler zurücksetzen
“ (Reset counter) resets the counters (READ and NOREAD) to 0.
If adjusting windows are selected the line after the adjusting window is aligned
If scanning windows are selected the scanning window will be adjusted with the adjusting
window and subsequently the line in the scanning window is scanned.
If only the top line is to be scanned the adjusting window is to be selected.
If the 2. line is to be scanned scanning window must be entered. It must be ensured that the
top line is always in the adjusting window.
Procedure when using a new programme.
Loading of the existing character set.
Place a letter under the camera and perform a recording.
