Topper WOW RO System, Installation & User Manual

Page: 15 / 39

15
The WOW RO System is uniquely designed to connect to one or more appliances (Figure 5), includ-
ing refrigerator icemakers/door dispensers, coolers (both gravity fed and pressurized), under - the -
counter hot & cold vented systems, commercial steamers (restaurants), commercial coffee makers
and other appliances that benefit from RO water. This section addresses
“ Do ’ s and Don ’ ts ” of con-
necting to one or more appliances. It also addresses how to determine storage and expansion
needs depending on how many appliances are hooked up.
General MUST Do ’ s for connecting ANY additional appliances:
A. It ’ s a must that the filter and water lines to any and all added
outlets be clear of air. Note: System will not work with air in
the lines.
B. Close isolation lines to all additional outlets.
C. Charge system to its full status (refer to Start - up, Page 13).
D. Follow the instructions provided from Pages 16 - 22.
Determining Your Expansion and Storage Needs:
A standard WOW RO System holds 1½ gallons. The WOW RO System has been designed in a mod -
ular format to add additional storage tanks as needed.
Review chart below for each device connected. Add all additional tanks needed from right hand
column to determine complete storage needs.
* Check device manual for actual reservoir capacity.
Connecting to Multiple Appliances
Device Average Reservoir in
Gallons *
Estimated Additional Tanks
Needed
Refrigerator / Icemaker 0 gallons None
Commercial Coffee Maker 1 gallon 0 - 1
Depending on draw down
needs at peak periods (See
Page 14 for draw down defini-
tion). Count glass/cups per
hour to determine if greater
than 1 gallon.
Gravity Cooler Up to 3 gallons 1
Pressurized Cooler Up to 3 gallons 1
Vented Hot Box 2/3 of a gallon or 84 oz. 0