VoiBRIDGE / VoxiPlus INSTALLATION MANNUAL
© 2008 TOPEX S.A.
page
24
4.
Insert the holder with the SIM card
back into the slot and push to close. Be
careful not to drop the SIM out of the
tray and to insert the holder properly
into the slot!
Note: The operation described above must be performed for all SIM card insertion and also when you
want to replace (change) the existing SIM card with a new one.
Warning: When inserting / extracting the SIM card the equipment must be powered off to avoiding
damaging the internal modules.
3.5
Power up the equipment
For the equipment power supply, use only the supply adapter that is included in the TOPEX
VoiBridge package.
Before plugging in the gateway, make sure that the mains voltage value meets the
specifications written on the label of the mains adapter.
Furthermore, make sure that the antenna has been connected. If you connect the gateway to
the power supply without an antenna, the GSM module transmitter might get damaged.
The power cord from the external adapter must inserted into the main receptacle and the low
voltage cable must be inserted in the power supply connector located on the back panel of the
VoiBridge equipment, as shown in figure 13.
Figure 14 – How to supply the equipment
The power supply is achieved through a special AC / DC adapter which is inserted in the special
connector from the back panel of the TOPEX VoiBridge equipment, and then in the wall outlet.
Following the power up of the TOPEX VoiBridge, the red LED located on the front panel of the
equipment must be on.
Warning: For powering TOPEX VoiBRIDGE you must use only the AC/DC adapter delivered by the
manufacturer. Using the other kind of adapter with different characteristics may cause the damage of
equipment!
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
