VoiBRIDGE / VoxiPlus INSTALLATION MANNUAL
© 2008 TOPEX S.A.
page
14
2.4
System Cards
TOPEX VoiBridge is built on compact and reliable equipment with up to 4 GSM channels in
small version and up to 12 GSM channels for advanced version.
The equipment includes two PCB cards enclosed in a small and compact cabinet which
contains several functions:
VoIP interfaces: LAN and WAN
GSM interfaces
Processor function
The small version of TOPEX VoiBridge features up to four Quad Band GSM, UMTS or CDMA
modules which allow an easiest connection to the Mobile Network. The extended configuration
version features up to 12 such mobile modules.
2.4.1 PGVoIP
Card
The “brain” of the equipment is the PGVoIP card, which includes a XD flash memory Card that
stores the embedded applications for the TOPEX VoiBridge equipment. The size of the XD Card
memory is either 128 or 256 MB, depending on the configuration.
The card has several optical indicators (LEDs) located on the front panel of the TOPEX
VoiBridge equipment, for showing the system status. There are three LEDs located towards the right
side of the panel and two built-in LEDs for each connector labeled RS 232, LAN, WAN.
Figure 6 – PGVoIP card connectors
On the front panel of the PGVoIP card, from left to right, we have:
A reset button for the reset of the system configuration (labeled RESET);
A serial connector (RJ45 type) for maintenance, programming and administration of the
equipment (labeled RS 232);
An Eth RJ45 connector for the connection to the local network (labeled LAN);
Another Eth RJ45 connector, for the connection to the external network (labeled WAN).
The PGVoIP card has several optical indicators (LEDs), located on the front panel of the
equipment, that show the status of the device. The LED’s significance is detailed in chapter 2.5 –
Status Monitoring.
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
