VoiBRIDGE / VoxiPlus INSTALLATION MANNUAL
© 2008 TOPEX S.A.
page
32
Now the reboot command is accepted. The system first performs operations for normal
shutdown, it stops processes and saves current values, then starts over again:
If you don’t restart the equipment, before closing down the HyperTerminal program you must
first close the work session with the Topex gateway
.
Use the
exit
command
.
If you don’t type
„exit”, even when you close HyperTerminal the work session remains open on the COM port
of the PGVOIP card of the equipment. This can be a hole in the security of the gateway
system! Such security holes must be avoided because unauthorized persons could exploit it to
gain access.
After you have logged out, you may log-in later, if you leave HyperTerminal open. You will be
asked again for the username and password for login. If you no longer need to configure the
Topex gateway, close down the HyperTerminal session.
If you have saved the HyperTerminal session with a specific name such as “TopexVoIPgw”,
then next time you want to connect to the Topex equipment you can open it directly, there is
no need to specify again the COM port and the link parameters:
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
