VoiBRIDGE / VoxiPlus INSTALLATION MANNUAL
© 2008 TOPEX S.A.
page
18
2.7
Power Supply Adapter
TOPEX VoiBridge equipment is power supplied from the main electricity network through a
special AC-DC external adapter. It is a switching mode power supply.
The AC-DC power supply adapter is fully enclosed in a plastic case with the following
dimensions LxWxH = 147 x 76 x 33 mm. The adapter features a green LED indicator for power on.
Figure 9 – Power supply connection
The adapter supports protections on short circuit / overload and over voltages. It is supplied with
a 120 cm length cable and it is fitted with a standard DC plug R1B with five pins. This plug supplies
the Topex equipment with different voltages: +5V and +/- 12V.
The power supply adapter corresponds to safety standards and electromagnetic compatibility
standards.
The input voltage range is 100-240V
AC
at 50 or 60 Hz, and the maximum input current is 1,6A.
The over voltage protection is 110
÷
140 % for +5V output and the hold up time s about of 12
ms at full load.
Note: The supply adapter is the disconnection device (there is no POWER switch on the
equipment), so the 230 V
AC
socket-outlet shall be installed near the equipment and must be easily
accessible.
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
