manualshive.com logo in svg

Topcon Pocket-3D, Reference Manual, Page: 216 / 316

Share
Download
Topcon Pocket-3D Reference Manual Download Page 216

Data Menu

Pocket-3D Reference Guide

3-106

The view screen will display the alignment created from the selected 
polyline (Figure 3-161). 

1. Press the 

+/-

 buttons to zoom in or out on the image, or press 

down on the screen and drag the image around. 

2. Press 

Next

 to continue. 

Figure 3-161. View Screen for Polyline to Alignment Conversion

On the alignment properties 

dialog box (Figure 3-162), enter the 

following parameters for the alignment, then press 

Finish

.

• Name for alignment – enter a name for the alignment.
• Set as current alignment – enable to set the alignment as the 

current alignment. 

Figure 3-162. Alignment Properties Dialog Box

Summary of Contents for Pocket-3D





























































































































































































































































































































Reviews:

No comments