manualshive.com logo in svg

Topcon Pocket-3D, Reference Manual, Page: 214 / 316

Share
Download
Topcon Pocket-3D Reference Manual Download Page 214

Data Menu

Pocket-3D Reference Guide

3-104

Convert TIN Surface to Points

On the 

Calculation type

 dialog box (Figure 3-157), do the following:

• Select 

Convert

 

TIN surface to points

, then press 

Next.

Figure 3-157. Calc Wizard – Convert TIN Surface to Points

This process converts a TIN surface to points from the current TIN 
surface on the main screen.
The view screen (Figure 3-158) displays the points created from the 
recently converted TIN surface. 

• Press the +/- buttons to zoom in or out on the image or press 

down on the screen to drag the image around.

• Press 

Next

 to save and return to the main screen. 

Figure 3-158. View Screen – TIN Surface Converted to Points 

Summary of Contents for Pocket-3D





























































































































































































































































































































Reviews:

No comments