manualshive.com logo in svg

Topcon Pocket-3D, Reference Manual, Page: 134 / 316

Share
Download
Topcon Pocket-3D Reference Manual Download Page 134

Data Menu

Pocket-3D Reference Guide

3-24

• Show control points – enable to display control point 

information on the main screen.

– Show names: enable to display control point names on 

the main screen.

– Show descriptions: enable to display control point 

descriptions on the main screen.

– Show points that are not part of localisation: enable to 

display points not part of the localization.

Figure 3-36. Control Options – Display Options

Surface

Used in 3D GPS+, Total Station, and Robotic applications, the Sur-
face menu creates, edits, and selects Design Surface files. Design Sur-
face files can also be copied between the Pocket-3D controller and the 
Control Box using a Flash Card.
Pocket-3D supports the following four types of Design Surface files:

• TIN Surface Model – large, irregularly shaped triangles. See 

“TIN Surface File” on page 3-26 for more details.
A TIN surface represents a surface as a network of non-
overlapping triangles. Within each triangle the surface is 
represented by a plane. The triangles are made from a set of 
points called mass points.

• Road Surface Model – horizontal alignments, vertical profiles, 

and templates situated (cross-section) along the road. See “Road 

Summary of Contents for Pocket-3D





























































































































































































































































































































Reviews:

No comments