Topcon Pocket-3D, Reference Manual, Page: 171 / 316

Alignment
P/N 7010-0628
3-61
Figure 3-89. Data

Linework

Layers
The
Layers
dialog box displays all layers within the selected file
(Figure 3-90 on page 3-62).
•
New
– press
New
to create a layer (Figure 3-90 on page 3-62).
The
Layer name
dialog box displays. Enter or select the layer
parameters:
– Layer name: enter the name of the layer.
– Show point numbers: enable to display on the main screen
point numbers for all points within the layer.
– Show point descriptions: enable to display on the main screen
point descriptions for all points within the layer.
– Show point elevations: enable to display on the main screen
point elevations for all points within the layer.
• Symbol – select the type of symbol desired for the Point layer.
•
Color
– press to select the desired color for the symbol (if
preferred), then press
Ok