Topcon Pocket-3D, Reference Manual, Page: 104 / 316

Setup Menu
Pocket-3D Reference Guide
2-58
Figure 2-78. Select a Surface File to Import
4. On the
import surface files
dialog box (Figure 2-79 on

page 2-59), do the following:
• Import into recipients current active project – enable to
import surface files into the current project.
• Overwrite surface w.same name – enable to keep name of
previous file.
• Replace all lines in layer w.same name – enable to replace all
lines in layer with the same name.
•
Back
– press to go back to previous screen.
•
Next
– press to go to the
Send
dialog box (Figure 2-79 on

page 2-59).
•
Cancel
– press to quit and return to the Main Screen.
5. On the
Send
dialog box (Figure 2-79 on page 2-59), press
Finish
to send the file and return to the Main Screen.