Topcon Pocket-3D, Reference Manual, Page: 207 / 316

Calculation Wizard
P/N 7010-0628
3-97
Figure 3-145. Convert Alignment to Points Preview
3. On the review screen (Figure 3-145), press
Points
. The
Points
dialog box displays (Figure 3-146).
The
points
dialog box displays the
Northing
,
Easting
, and
Elevation
of the newly created point(s) (Figure 3-146).
4. Press
Ok
to continue.
Figure 3-146. Converted Points
5. On the
point properties
dialog box (Figure 3-147 on page 3-98),
enter the following parameters for the points, then press
Finish
.
• Pt. number – enter the point number.
• Pt. descriptor – enter the point description (if preferred).
• Add to layer – stores the point to the selected layer.