manualshive.com logo in svg

Topcon Pocket-3D, Reference Manual, Page: 137 / 316

Share
Download
Topcon Pocket-3D Reference Manual Download Page 137

Surface

P/N 7010-0628

3-27

The preview 

dialog box displays the TIN surface created from the 

selected points and/or lines (Figure 3-40). Press the 

+/-

 buttons to 

zoom in or out on the image, or press down on the screen and drag the 
image around. Press 

Next

 to continue. 

Figure 3-40. TIN Surface Preview

The TIN surface parameters 

dialog box sets the following parame-

ters. Press 

Finish

 (Figure 3-40) to display the

 Surface(s) 

dialog box 

(Figure 3-41 on page 3-28).

• Name for TIN surface – enter the name of the TIN surface.
• Set as current surface – enable to set the surface as the current 

surface. 

•

Ok

 – press to display the 

new TIN surface confirmation screen 

(Figure 3-41 on page 3-28).

Summary of Contents for Pocket-3D





























































































































































































































































































































Reviews:

No comments