Topcon Pocket-3D Reference Manual Download Page 201

Page: 201 / 316

Calculation Wizard

P/N 7010-0628

3-91

Figure 3-135. Distance From Two End Points

The view screen displays the two original points and specified dis-
tance between the two points created in the

Distance From

fields

(Figure 3-136 on page 3-92).

• Press the

Result

button to display the list of points



(Figure 3-136 on page 3-92).

• Select the point you want to create and press

. The point that is

created displays on the main screen in a circle (Figure 3-136 on
page 3-92).

• Press the

+/-

buttons to zoom in or out on the image, or press

down on the screen and drag the image around.

• Press

Next

to continue.

Summary of Contents for Pocket-3D





























































































































































































































































































































Search results

Summary of Contents for Pocket-3D

Reviews:

Topcon Pocket-3D, Reference Manual, Page: 201 / 316

Search results

Summary of Contents for Pocket-3D

Reviews: