Topcon GLS-1000 SERIES, Instruction Manual

Page: 52 / 76

7-1
7 Station Setting
7 Station Setting
Data related to the scanning (occupied point name, backsight point name, target data, 3D data, etc.)
are stored in the station.
Create a new station when moving to another station to scan the object.
To continue scanning from the same station, or to control existing data, select from the existing stations.
Station data is saved on the SD card.
Station1
Backpoint1
Station1
Project1 (Directory)
Station1 (Directory)
3D Scan1 (Directory)
Target Scan1 (Directory)
Station information file (sta file format)
Point cloud file of back sight (clt file format)
Project information file (.prj)
3D coordinate of back sight (trg file format)
Camera orientation/calibration data (binEXT file format)
3D Scan2 (Directory)
Point cloud file (clr file format)
JPEG file e.g) 0001.jpg,0002.jpg
Angle file e.g) 0001.ang,0002.ang
Tilt orientation file e.g) 0001.tor,0002.tor