Topcon GLS-1000 SERIES, Instruction Manual

Page: 18 / 76

2-3
2 Preparations before Use
z When using an external power source
1
Connect the clips of the external power source cable (PC-21) to the terminals of the external power
source (12V, commercially available).
2
Connect the external power source cable (PC-21) to the battery connector.
Use one of the following methods to connect the instrument to the PC.
z Connection via Wireless LAN cards
Network setting is necessary if the instrument is connected to the PC via wireless LAN cards. After
purchasing the instrument, make sure the IP address, subnet address, and SSID of this instrument
correspond to those of the PC.
1
Move to the network setting screen.
Refer to Chapter 5.2.2 “Network Settings (when the instrument is used connected to a PC)”
2
Match the PC setting with the instrument setting.
External battery
Battery terminal
Red clip (+)
Black clip (-)
PC-21
Battery connector
4.
Network Settings (when the instrument is used connected to a PC)
[Initial setting of the instrument at shipping]
IP address
: 192.168.0.1
SUBNET address : 255.255.255.0
SSID
: gls1000
Refer to Chapter 5.2.2 “Network Settings (when the instrument is used connected to a PC)” for PC
settings.
If you want to change the IP address, subnet address, or SSID of the instrument, Refer to Chapter
5.2.2 “Network Settings (when the instrument is used connected to a PC)”
[Example of the setting on the user's PC]
IP address*
: 192.168.0.240
SUBNET address : 255.255.255.0
SSID
: gls1000
* "240" at the end of the IP address is
arbitrarily-specified.