Topcon GLS-1000 SERIES, Instruction Manual

Page: 58 / 76

8-1
8 Scanning
8 Scanning
There are two types of scanning: target scanning, which measures only the target and 3-D scanning,
which obtains 3-D data.
Scanning data is kept in the Station folder on the SD card.
Target scanning
Target scanning is used to scan a target set in the 3-D scanning area.
Target scanning data is used in the after-processing to align 3-D scanning data obtained from multiple
points.
In target scanning, the coordinates of the center of the target are obtained.
3-D scanning
3-D scanning is used to obtain three-dimensional data.
Determine the scanning area first, and set the parameters (scanning density).
Project1 (Directory)
Station1 (Directory)
3D Scan1 (Directory)
Station information file (sta file format)
Point cloud file of back sight (clt file format)
Project information file (.prj)
3D coordinate of back sight (trg file format)
Camera orientation/calibration data (binEXT file format)
Point cloud file (clr file format)
JPEG file e.g) 0001.jpg,0002.jpg
Angle file e.g) 0001.ang,0002.ang
Tilt orientation file e.g) 0001.tor,0002.tor
F2
z
Measurement menu operation
SELECT MENU
F1 STATION MENU
F2 SCAN MENU
P1/2
↓
SCAN MENU
F1 3D SCANNING
F2 TARGET SCANNING
3D SCANNING
F1 SCAN WIZARD
F2 MEASUREMENT
F2
TARGET SCANNING
TARGET NAME INPUT
[pt_ ]
NUME <-
F1