32. Connect the ducted fan unit to the speed
controller. !Attention! Make sure that the
engine turns the right way, otherwise correct
your setup.
Lead the speed controller cable and the
power cables through the fuselage and
install the ducted fan unit using double-sided
tape.
31. Lead the rudder servo cable through
the fuselage and glue the rudder to the
fuselage
33. The wing is being secured to the
fuselage using a Polyamid M5 (metric size
size) x 20mm plastic bolt and a washer. In the
rear the decals will further strengthen the
assembly.
Tomahawk Design 89284 Pfaffenhofen GERMANY
Keine Haftung für Druckfehler Technische Änderungen vorbehalten Stand 09-2010
Made in Germany
Seite 17
