Toku TNB-08M Manual Download

Page: 106 / 133

102

TOP RUBBER SHIM for BOX BRACKET and SIDE MOUNT SILENCED BRACKET

※

In case of using the shim as counter measure to the serviceability limit it must be applied only

one time. From the 2’nd time later replace the top rubber with new one.

ISOLATOR SHIM T for BOX BRACKET and SIDE MOUNT SILENCED BRACKET

※

In case of using the shim as counter measure to the serviceability limit it must be applied only

one time. From the 2

’

nd time later replace the isolator/isolator T with new one.

SHIM G for BOX BRACKET and SIDE MOUNT SILENCED BRACKET

※

In case of using the shim as counter measure to the serviceability limit it must be applied only

one time. From the 2

’

nd time later replace the isolator TF/isolator TFR with new one.

GUIDE PLATE SHIM for BOX BRACKET and SIDE MOUNT SILENCED BRACKET

Model TNB-

08M, 1M, 2M, 3MB,

4M, 5M, 6E

Thickness T (mm)

Model TNB-

6M, 7J, 16K/

110

, 151LU2

27K/

190LU2

, 230LU2

310LU1, 60K/

400LU2

Thickness T (mm)

Model

TNB-

7J, 151LU2

Thickness T (mm)

Model TNB-

08M, 1M, 2M, 3MB, 4M, 6M,

6E, 7J, 16K/

110

, 151LU2,

27K/

190LU2,

230LU2,

310LU1, 60K/

400LU2

Thickness T (mm)

0.5

Thickness T (mm)

Summary of Contents for TNB-08M





































































































































Search results

Summary of Contents for TNB-08M

Reviews:

Related manuals for TNB-08M

Brands by name

Popular brands

Toku TNB-08M, Manual

Search results

Summary of Contents for TNB-08M

Reviews:

Related manuals for TNB-08M

Brands by name

Popular brands