7
SV start
．．．
Program operation starts from the SV start temperature setting "
".
SV
Start operation from this point.
step 1 step2 step3 step4
4.5 Time Signal Output
It is a function to output at any time at the start of operation or at the transition to the next step.
ON Time
Time Signal
Output
OFF Time
ON
OFF
Start of Step
4.6 Run Signal Output
It is a function to turn on the output during the operation mode or pause mode.
In reset mode, the output is turned off.
Reset Mode
Run Signal
Output
Reset Mode
Operation Mode
/
Pause Mode
ON
OFF
Start Operation
Stop Operation
4.7 External Operation Function
-It is a function to switch between reset mode and operation mode by external input (DI).
-When "External operation selection setting" is "ON", the function is enabled.
-When the external input is open, the reset mode is set, and when the external input is closed, the operation mode is set.
4.8 Timer operation function
-It is a function to count the time without controlling in step 1. After "Step 1 Time" has elapsed, shift to the next step and
start control.
-The function is enabled when all of the following conditions
①
to
③
are met.
①
Set "SV / PV start selection setting" to "PV start 1" or "PV start 2"
②
Set "Step 1 temperature setting" to "
(lower limit -1)"
③
Set "Step 1 hour setting" to "1 minute" or more