10
6.2 Detailed description of modes
①
Reset mode
- This mode will stop control. (The system becomes this mode when the power is turned on.)
②
Operation mode
- This mode will conduct programmed run control. (The RUN lamp lights.)
- The SV display will blink while a wait operation is in process in the wait zone or wait time.
- After a patterned operation is complete, the SV display will display "
" and stop the
control. The PV display will display the current temperature.
- Holding the
▽
key down for 3 seconds during operation will enable step feed.
③
Pause mode
- This mode will pause programmed run control. (The RUN lamp blinks.) It will stop the time
and maintain the control temperature measured at that point in time.
④
Pattern number setting mode
- This mode will set the pattern number of the program to be executed.
- Use the
△
and
▽
keys to set a pattern number.
- When the system shifted from "operation mode," holding the
▽
key down for 3 seconds will
enable step feed.
- When the system shifted from "operation mode," pressing the PATT./STEP key will display
the time elapsed and time setting.
PV screen: time elapsed, SV screen: time setting
- Pressing the
△
and
▽
simultaneously while holding down the PATT./STEP will turn on all
the indicators.
<Display when shifted from reset mode>
PV:
Displays the pattern number selection
character.
SV:
Displays the pattern number setting.
<Display when shifted from operation mode>
PV: Displays the pattern number being
executed or the time elapsed.
SV: Displays the step number being executed
or the time setting.