Toa VX-3308WM Operating Instructions Manual Download Page 87

Page: 87 / 89

3-28

Chapter 3

OPERATION

Step 1. Press the Intended control input key when the

Control status indicator is unlit.

The control input assigned to the Intended

control input key becomes active and the

Control status indicator lights yellow.

Note

Operation is invalid even if you press the

Intended control input key when the Control

status indicator is lighting yellow though its key

is not pressed. This is such a case when the

control input is placed in Active state through

other switch operation.

Step 2. Press the Intended control input key again to

make the control input Inactive.

The Control status indicator will go off.

7.2. Intended Control Input Operation

The Intended control input of the VX-3308WM can be operated using the Remote microphone's function key.

Step 1. Press the Intended control output (pulse) key

when the Control status indicator is unlit.

The Control output pattern assigned to the

Intended control output (pulse) key is activated

and the Control status indicator lights yellow.
Note

Operation is invalid even if you press the

Intended control output (pulse) key when the

Control status indicator is lighting yellow though

its key is not pressed. This is such a case when

the control output pattern is being activated by

other Event.

Step 2. Press the Intended control output (pulse) key

again to end Control output pattern activation.

The Control status indicator will go off.

7.3. Intended Control Output Operation (Pulse)

The intended control output of the VX-3000 can be operated using the Remote microphone's function key.

Control status indicator
Selection indicator

Function key

(Intended Control Input key)

Function key

Green

Yellow

Green

Yellow

Control status indicator
Selection indicator

Function key

(Intended Control Output

[Pulse] key)

Function key

Green

Function key

Green

Function key

Yellow

Summary of Contents for VX-3308WM


























































































Search results

Summary of Contents for VX-3308WM

Reviews:

Brands by name

Popular brands

Toa VX-3308WM, Operating Instructions Manual

Search results

Summary of Contents for VX-3308WM

Reviews:

Brands by name

Popular brands