Toa VX-3308WM Operating Instructions Manual Download Page 86

Page: 86 / 89

Chapter 3

OPERATION

7. OTHER FUNCTIONS

Operations of audio monitor and control input/output can be performed using the Remote microphone's function

key.

[Setting example to function keys]

Key

Item Name

Function

Function key R7

Audio Monitor

Monitors audio signals being broadcast at an arbitrary

zone.

Function key R8

Intended Control Input Operation

Makes the Intended control input Active.

Function key R9

Intended Control Output Operation (Pulse) Activates the Intended control output pattern.

Function key R10 Intended Control Output Operation (Level) Activates the intended control output pattern while this

key is held down.

Function key R7

Function key R8

Function key R9

Function key R10

7.1. Audio Monitor

Broadcast status indicator

Audio signals during broadcast can be monitored by the

remote microphone.

Step 1.

Press the Audio monitor key.

The Broadcast status indicator lights green while

audio signals are broadcast to the zone assigned to

this function key.

Audio signals being broadcast in the zone assigned

to the Audio monitor key are output from the remote

microphone.

Notes

• No broadcast is output to the zone assigned to

the Audio monitor key when the Broadcast status

indicator is unlit.

• Only one remote microphone can be used for

audio monitoring even when 2 or more remote

microphones are connected to a single VX-3000 .

Only the remote microphone of which Audio Monitor

key is pressed most recently is effective for audio

monitoring, causing other remote microphone

engaged in monitoring to be interrupted.

Step 2.

Press the Audio monitor key again to end monitoring.

The Broadcast status indicator will go off.

Green

Green Green

Selection indicator

Function key

(Audio Monitor key)

Function key

RM-300X

Summary of Contents for VX-3308WM


























































































Search results

Summary of Contents for VX-3308WM

Reviews:

Brands by name

Popular brands

Toa VX-3308WM, Operating Instructions Manual

Search results

Summary of Contents for VX-3308WM

Reviews:

Brands by name

Popular brands