Toa VX-3308WM Operating Instructions Manual Download Page 62

Page: 62 / 89

3-3

Chapter 3

OPERATION

Function key

Talk key

(Zones 1, 2 and 3)

(Zone 1)

(Zone 2)

(Zone 3)

Green

Yellow

Green

Yellow

Talk key

Yellow

Flashes

green

Broadcast status indicator
Microphone indicator

(Zones 1, 2 and 3)

Green

Yellow

1.3. Operation Examples

1.3.1. Example of broadcasting to the selected (pattern-designated) zone

Step 1. Press Function key R1 (Zones 1, 2 and 3).

All of the designated zones are selected, and the

zone selection indicator next to Function key R1 lights

green.
Note

To cancel the selection, press Function key R1 again,

or press Function key R5 (Zone clear).

The zone selection indicator will go off.

Step 2. Press the Talk key.

A chime will be broadcast. This chime will be

audible through the monitor speaker built in the

RM-300X.

The Microphone indicator flashes

green while the chime is being

activated.

Note

Pressing the Talk key again while

the chime is being activated

causes the chime to stop, ending

the broadcast in progress.

Step 3. When the microphone indicator next to the Talk key

lights green, make the microphone announcement.

The zones assigned to Function keys R2 – R4 are

included within the zone selection pattern assigned

to Function key R1. Therefore, the broadcast status

indicators next to Function keys R2 – R4 will light yellow

in the same way.

Step 4. Press the Talk key.

The broadcast ends.

Step 5. Press Function key R5 (Zone clear).

The zone selection is cancelled.
Note

If it is desired that the zone selection be left unchanged, there is no need to clear the selected zones.

Broadcast status indicator
Zone selection indicator

Function key

(Zones 1, 2 and 3)

Green

Summary of Contents for VX-3308WM


























































































Search results

Summary of Contents for VX-3308WM

Reviews:

Brands by name

Popular brands

Toa VX-3308WM, Operating Instructions Manual

Search results

Summary of Contents for VX-3308WM

Reviews:

Brands by name

Popular brands