STACIS
2100 Piezoelectric Isolation System - Installation & Operation Manual
P/N 96-28765-01
Page 41 of 43
Table 11: Summary of Serial Port Commands
s
<CR>
‘
Read Status
” - Returns status byte, this is a null command; it does not affect any
changes to system operating parameters.
p
<CR>
“
Part Number
” - sends the TMC system software part number and revision to the front
panel LCD. It also echoes the P/N to the serial port if the port is used.
w
<CR>
“
Print System Status
” - sends to PC the string of current status of all of alarms, warnings,
feedback settings, etc.
u
<CR>
“
System Self-test result
” - sends to PC the string of measured value, compared with
default value for each active servo loop.
r
<CR>
“
Reset
”
- System Reset; restores parameters to values saved in flash memory
(NVRAM), and then initiates startup sequence. Returns status byte showing
current mode.
