STACIS
2100 Piezoelectric Isolation System - Installation & Operation Manual
P/N 96-28765-01
Page 21 of 43
When the title screen appears, the isolation system is fully enabled, including
access to all functions. Normal operation will start.
Optional configurations are described in the following sections.
If the title screen does not appear after completion of the POST and there is
no error message displayed on the LCD, or if the status LED remains
amber/orange, shut the controller OFF and then turn it back ON after
approximately 10 secs to repeat the power up sequence. If system still does
not function correctly, contact TMC service.
If at any time during operation the system becomes unstable, proceed to
section 6.4 for instructions on control loop gains adjustment using the menu
Adjust X/Y/Z Gains
