STACIS
2100 Piezoelectric Isolation System - Installation & Operation Manual
P/N 96-28765-01
Page 43 of 43
D. Select communication port for RS232 interface (same port as in step A above).
E. Select axis (1, 2, 3, and 4 in H (horizontal) or Z (vertical)). Numbers (1,2, etc.) correspond to the
isolator position.
F. Click on
Start test
.
G. Click on
Save Test File
and then save test data for each axis as a
CSV
file.
H. After collecting the transfer function for all axes, exit from
Upload Data to PC
controller LCD menu
and close TMC Analyzer program.
I.
E-mail test data files to TMC for review.
•
The controller LCD will display
“## axis / Test in Progress
”.
•
The gain-phase profile will plot on a log graph starting with the higher frequencies.
•
The complete test takes approximately 3 minutes.
•
Click on
Stop test
to stop at any time.
