TA 220
34 / 64
Put the Li-Po storage
battery in the charger
until it engages audibly.
The
charging operation
starts
automatically, the
LED
status indication is
bright (red)
.
The
charging operation
has
ended
, when the
LED
status light
becomes green
.
8.4.
Charging the lithium
– polymer storage battery
Explanation of charging stages:
The LED status indication is either red or
green.
Red LED is bright - storage battery
is being charged, charge 0 to 80 %
Green LED is flashes - storage battery
is being charged, charge 80 to 99 %
Green LED is bright - storage battery
fully charged, charge 100 %
Red LED flashes - storage battery
overheated
or voltage below 10.4 V
for troubleshooting required
see item 10 Remedy of faults
After the end of the charging operation remove the Li-Po storage battery from the charger
and also pull the mains connector of the charger out of the socket. This helps avoid
unnecessary expenses for power.
H TA 220 EU 37/09
