TA 220
25 / 64
The disregard of the safety rules below as well as faulty handling can result in
serious injuries.
Inform yourself!
Read the operating
instructions of the tool
carefully before working with
it.
Caution: risk of squeezing!
Do not let your fingers get into
the area of the tensioning
wheel.
Protect yourself!
Protect your eyes, face and
hands (gloves resisting cuts)
during works.
Caution: Exclusively strap
packing items!
During strapping operations
no hands or other parts of the
body must get between
strapping material and packing
item.
Attention! Strap leaps up!
When cutting the strap hold
the upper part firmly and stand
aside.
Attention! The lower part will
leap up.
Exclusively use original
TITAN spare parts!
The use of spare parts not
made by Titan excludes
guarantee and liability.
Attention! Strap may tear!
Strap may tear during
tensioning! Do not stand in the
alignment of the strap.
The use of strap not
recommended can result in
tearing strap during tensioning
and poor seal qualities.
Only use the relevant TITAN
quality products!
This tool may only be
operated by staff being
instructed as to its use. Do not
hesitate to contact the
TITAN
packing advisor
in case of
questions.
Work place!
Keep your work place orderly.
A disorderly work place results
in risk of accident. During
strapping operations pay
attention that you stand safely
and the equilibrium is faultless
to prevent the risk of dropping.
Never operate the tool when
the working position is
unfavourable!
Maintenance of the tool!
Just a tool in a faultless
condition is a safe tool.
Regularly check the state of
your tool for defective or worn
parts. Never work with a tool
which is with defective or worn
parts. Alterations to the tool
are strictly forbidden. The
disregard of that instruction
can result in very serious
injuries.
H TA 220 EU 37/09