TA 220
30 / 64
Li-Po storage battery
fully charged
Li-Po storage battery
almost empty
Li-Po storage battery
almost empty!
(For charging see item 8.4)
To form a seal draw lever 2
towards you
; friction
welding starts.
The LED is bright; an audible acoustic signal
indicates the end of the welding cycle after a few
seconds and
the strap is cut automatically
.
The seal is formed!
Pull lever 3 to the grip; the strap
is
released
then
,
hold it firmly. Then
swing the tool to the right out
of the strapping
.
Check your seal; it should look like
that.
If your seal is not similar to the one in the figure, the welding time may have been set
wrongly. Optimise the seal, see item 7 (settings).
6.1
Message state of charge lithium
– polymer storage battery
With each acoustic signal
which can be heard when the seal is formed the LED display
informs about the
state of charge of the lithium
– polymer storage battery
.
H TA 220 EU 37/09
