17
7.2.2 GREASING POINTS
Slide Tracks:
The carriage assembly slide tracks should be greased every six months (or more
frequently in case of noise generation).
Slightly grease the slide tracks over their whole length using a brush.
7.2.3 OPERATION AND WEAR CHECKS
.
1. Examine lift for structural cracks, bends, or other signs of damage prior to each use. Do
not use this product if worn or damaged.
2. Check that the safety locking mechanism is functioning correctly.
3. Check that the safety lock is audibly and visibly operating correctly.
4. Check the floor for stress cracks near the anchor bolts.
7.2.4 LIFT STABILITY
1. Every six months check the nuts of all bolts for correct installation torque.
2. Retighten them as required.
NOTE: DO NOT USE AN IMPACT WRENCH.
7.3 CLEANING
DANGER:
DO NOT USE HIGH PRESSURE / STEAM JET CLEANERS OR
CAUSTIC CLEANING AGENTS.
RISK OF DAMAGE!
1. PERIODICALLY WASH OFF AGGRESSIVE SUBSTANCES AND TREAT THE LIFT
WITH OIL OR WAX SPRAY.
2. REPAIR THE DAMAGE TO THE PAINTWORK IMMEDIATELY TO PREVENT
CORROSION. THE RAL NUMBER IS AVAILABLE THROUGH THE
MANUFACTURER.
