TIPTEL easyDECT XL2, Operating Instructions Manual

Page: 78 / 85

Appendix
76
Symptom
Handset works, but
doesn’t access the base
station.
Handset works and
access the base unit, but
no dial tone is heard.
Handset works perfectly,
but the numbers are not
dialed to the line.
Handset works perfectly,
but you hear a beep
during the phone calls.
Noice and audio
interferences on your
phone calls.
Handset works perfectly,
but doesn’t ring with
incoming calls.
Handset can only
receive calls. Keypad
locked.
The phone doesn’t dial
certain numbers
Phone doesn’t work
properly with some
special services or if
connected to an
exchange extension
(PABX).
Possible cause
No power connection in the
base station.
Handset not registered to
the base station or lost of
registration.
Wrong connection of the
phone line cord.
You have set the dial done
multi frequency system
(DTMF), but your line
doesn’t support it.
Batteries near to be fully
discharged
Handset too far from the
base.
Ring volume level set to
OFF.
You have disabled the
keypad lock function.
Outgoing calls barring
function activated.
Flash time not properly set.
Solution
Ceck the connection of the
AC power adapter
Try registering the handset to
the base.
Check the connection of the
line cord.
Try selecting the pulse dial.
Check the batterie charge
and charge it if necessary.
Get closer to the base
station.
Select another ring level.
Try by keeping the * key.
Chek the call barring function
and change it if necessary.
Check the flash time.