manualshive.com logo in svg

TIPTEL easyDECT XL2, Operating Instructions Manual

Share
Download
TIPTEL easyDECT XL2 Operating Instructions Manual Download Page 35

Call lists

33

Searching for and dialing a number in incoming calls list

1. In standby mode, press the LIST soft key.
2. Press the arrow keys to choose „2:Incoming Call“, then press the

SELECT soft key. The list of incoming calls displays.

3. Scroll through the incoming calls list using the arrow keys until you

find the desired number, and press the SELECT soft key. You will

also see the name (if available) and the date/time in which you

received the call as well as its duration. If the number was

previously entered in the phonebook, you can also see its

associated name.

4. To place a call to the number, press the 

 key.

To return to standby mode, press the 

 key.

At step 2, if the list is empty, the phone informs you about that with the
message „Caller ID list empty“ and returns in standby mode.

Using incoming calls options

You can edit, save, or delete a number in the incoming calls list as follows:

1. Find the desired number in the incoming calls list as per the steps 1

through 3 in the par. above.

2. Press the OPTION soft key to display the option menus.
3. Press the arrow keys to choose the desired option:

1:Edit  allows you to edit the number. Use the CLEAR soft key to

delete the last entry (after editing the number, you can save it in the

phonebook with the following option or place a call to the number).

2:Save number: allows you to save the number in the phonebook

see par. “Storing a phone number in standby mode“, step 4.

3:Delete: allows you to delete the selected number.

4:Delete All: allows you to delete the whole incoming calls list (a

Summary of Contents for easyDECT XL2






















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands