WARNING
CONGRATULATIONS on your purchase of a Triumph paintball marker.
We believe our Triumph line of markers to be the most accurate and durable
paintball markers available. All
Triumph line marker models will give many
years of dependable service if cared for properly.
Please take time to read this manual thoroughly and become familiar
with your Triumph
model’s parts, operation, and safety precautions
before you attempt to load or fire this marker. If you have a missing
or broken part or need assistance, please contact Tippmann
®
Consumer Relations at 1-800-533-4831 for fast friendly service.
TABLE OF CONTENTS
Warning/Caution ........................................................................................ 2
Warning/Caution Barrel Sleeve Installation ......................................... 2
Warning/Liability Statement .................................................................... 4
Safety is your Responsibility .................................................................. 4
Safe Mode = Turning The Safety On (PUSH SAFE) .......................... 4
Fire Mode = Turning The Safety Off (PUSH FIRE) ............................. 4
Getting Started ........................................................................................... 6
1. Prepare Marker for Air Supply Cylinder Installation .................. 6
2. Air Supply Cylinder Installation ..................................................... 6
3. Hopper Installation ........................................................................... 7
4. Rate of Fire Adjustments and Troubleshooting .......................... 7
5. Velocity Adjustment .......................................................................... 7
Schematics ............................................................................................... 10
Specifications - Triumph Line Marker Models ................................... 12
Unloading Your Marker ........................................................................... 13
Air Supply Cylinder Removal ................................................................ 13
Cleaning & Maintenance ........................................................................ 13
Marker Disassembly / Assembly ........................................................... 14
Repairing Air Supply Leaks ................................................................... 21
Storage ...................................................................................................... 21
Warranty and Repair Policy ................................................................... 22
Warranty or Repair Procedure .............................................................. 22
Warranty Registration ............................................................................. 22
3
E
N
G
L
I
S
H
2
E
N
G
L
I
S
H
CORD LENGTH
ADJUSTOR
BUTTON
BARREL SLEEVE INSTALLATION
WARNING
THIS IS NOT A TOY. MISUSE MAY CAUSE SERIOUS
INJURY OR DEATH. EYE, FACE AND EAR PROTECTION
DESIGNED FOR PAINTBALL MUST BE WORN BY THE
USER AND ANY PERSON WITHIN RANGE. WE
RECOMMEND AT LEAST 18 YEARS OLD TO PURCHASE.
PERSONS UNDER 18 MUST HAVE ADULT SUPERVISION
WHEN USING THIS PRODUCT. READ THE OWNER’S
MANUAL BEFORE USING THIS PRODUCT.
4) AFTER CORD LENGTH IS
ADJUSTED, LOCK CORD
LENGTH BY TYING A KNOT IN
THE CORD AGAINST THE BACK
OF THE ADJUSTOR AS SHOWN.
www.triumphpaintball.com
2955 Adams Center Road, Fort Wayne, IN 46803 USA
P) 260-749-6022 • F) 260-749-6619
• EXCEPT WHEN YOUR MARKER IS IN USE, ALWAYS MAKE
SURE THAT THE TRIGGER SAFETY IS IN SAFE MODE (SEE
INSTRUCTIONS ON PAGE 4), AND THE BARREL SLEEVE IS
PROPERLY INSTALLED ON YOUR MARKER AS SHOWN BELOW.
1) SLIDE BARREL INTO SLEEVE AND LOOP CORD OVER TOP
OF RECEIVER AND POSITION AT BACK OF GRIP AS SHOWN
BELOW.
TIPPMANN
®
BY
2) PINCH CORD LENGTH
ADJUSTOR BUTTON AND
HOLD TO BACK OF GRIP AS
YOU PULL CORD THROUGH IT UNTIL ADJUSTOR IS SNUG
AGAINST BACK OF GRIP, THEN RELEASE BUTTON.
3) CHECK TO BE SURE YOU LEAVE ENOUGH CORD
ELASTICITY TO PULL CORD/ADJUSTOR UP OVER TOP OF
MARKER TO REMOVE BARREL SLEEVE FOR FIRING.
