Tippmann 98 Custom Platinum Series Basic Owner'S Manual Download Page 14

Page: 14 / 40

E
N

S
H

WARRANTY AND REPAIR POLICY

WARRANTY OR REPAIR PROCEDURE

If you should encounter any problems with your marker and you
have aftermarket parts on your marker, please test it with the
original stock parts before sending it in.
Always unload and remove air supply before shipping a marker (see page
20). Do not ship your air supply tank if it is not completely empty.
For warranty and non-warranty repair:
1. Ship or deliver your product(s) to:

Tippmann Sports, LLC
2955 Adams Center Road
Fort Wayne, IN 46803

2. Postage or delivery charges must be prepaid.
3. Include a brief statement regarding the requested repair,

your name, return address and telephone number where
you can be reached during normal business hours, if possible.

Our policy is to complete the necessary repair work within 24 hours
and return it to you via regular ground UPS. If you wish to have it
returned using a faster service, you can request for NEXT DAY AIR
UPS OR SECOND DAY AIR UPS. You will be charged for this service
and must include your credit card number with the expiration date.
Your card will be charged the difference in additional cost over regular
ground shipping service.

Tippmann Sports, LLC warrants that this product is found free from
defects in materials and workmanship for a period of 2 years from
the original date of purchase by the initial owner/purchaser. This
warranty does not apply to defects discovered after purchase which
were caused by the unauthorized modifications and alterations of
our product. Tippmann Sports, LLC will repair or replace, without
charge, any of its markers that have failed through defect in
material or workmanship. Tippmann

is dedicated to providing you

with the ultimate paintball marker and the quality support necessary
for satisfactory play.

WARRANTY REGISTRATION

Register your marker either:
1. On line at www.tippmann.com. (or)
2. Complete attached registration card and mail to the above address.

Storage

Before storage unload and remove air supply (see page 20). Then install Barrel
Sleeve (see page 2) and put your marker in Safe Mode (see page 4). You should
store your marker in a dry area. Before storing your marker make sure that the
marker is cleaned and oiled (see cleaning and maintenance on page 20) so that it
does not rust. Store your marker with the bolt in the forward position, uncocked.
When removing your marker out of storage make sure Barrel Sleeve is installed
(see page 2) and safety is in Safe Mode (see page 4). You should re-oil the rear
bolt and the front bolt o-ring before use (see cleaning and maintenance on page 20).

Repairing Air Supply Cylinder Leaks

The most common leak occurs from a bad air supply valve o-ring. To replace a
valve o-ring you must first remove the bad o-ring and then install a new one. This
o-ring is located on the tip of your air supply valve. The best valve o-rings are
made of urethane. The urethane o-rings are not affected by high air supply
pressures. These may be purchased from Tippmann

or your local paintball dealer.

NOTE: If new valve o-ring does not resolve air supply leak, do not attempt to
repair air supply cylinder. Contact Tippmann Sports, LLC or your local paintball dealer.

SPECIFICATIONS: Tippmann

Custom

Platinum Series

Models ............................................... BASIC - Non-A.C.T. / with A.C.T. / PRO

Caliber ........................................................................................................................ .68
Action ................................................................. Semi-Automatic (open bolt blow-back)
Power/Air Supply ....................................................... compressed air, nitrogen or CO2
Hopper Capacity ...................................................................................... 200 Paintballs
Ball Feed (Without

) ........................................................................................ Gravity

Ball Feed (With

) ................................... Gravity / Tippmann

Anti-Chop Technology

Cycle Rate ........................................................................................ 8 shots per second
Standard Barrel Length - BASIC models .............................................. 8.5” / 21.59 cm
Overall Length (with standard barrel & no tank) - BASIC models .......... 19.63” / 48.86 cm
Weight (without tank) - BASIC (without E-Trigger

or Response

) ..... 2.9 lbs. / 1.32 kg

Standard Barrel Length - PRO

models .................................................... 11” / 28 cm

Overall Length (with standard barrel & no tank) - PRO

models .......... 21” / 53.34 cm

Weight (without tank) - PRO

(without E-Trigger

or Response

) ...... 3.1 lbs. / 1.41 kg

Effective Range ............................................................................. 150+ ft. / 46+ mètres
Velocity ......... Always measure your marker’s velocity before playing paintball and
never shoot at velocities in excess of 300 feet per second (see instructions on page 7).
Model Specific ..................... Custom

Platinum Series

BASIC RESPONSE

Cycle Rate ...................................................................................... 15 shots per second
Weight (without tank) ......................................................................... 2.85 lbs. / 1.29 kg
Model Specific ............... Custom

Platinum Series

BASIC

E-TRIGGER

Cycle Rate .............................................................. Adjustable 10-30 shots per second
Weight (without tank) ............................................................................. 3 lbs. / 1.36 kg
Model Specific ...................... Custom

Platinum Series

PRO

RESPONSE

Cycle Rate ...................................................................................... 15 shots per second
Weight (without tank) ........................................................................... 3.2 lbs. / 1.45 kg
Model Specific ................ Custom

Platinum Series

PRO

E-TRIGGER