TiLite Rigid Aero Z Series Owner'S Manual Download Page 54 | Manualshive

Page: 54 / 102

background image

TiLite

®

OM000007 - Rev. B

46

Side Guard Bracket

Side Guard
Mount

Frame

Allen Screws

Cloth Side Guards

(TR Series, YG Series, YR Series, ZR Series, Aero Z,
BB and Evo)

Removing/Replacing Cloth Side Guards

1. Lift up on the seat cushion and remove it from the

chair.

2. Separate the cloth side guards from the seat

upholstery and the back upholstery. See Figure 50.

3. If desired, install new cloth side guards onto the seat

and back upholstery. Note: The fastening flaps that
secure the cloth side guards to the back upholstery
wrap around the outside of the back canes and
under the back upholstery flap.

4. Replace the seat cushion.

Rigid Removable and Quad

Removable Side Guards

(Standard and Carbon Fiber)

(TR Series, YR Series, ZR Series, Aero Z, BB and
Evo)

Using Rigid Side Guards

To remove either type of rigid side guard, lift the side
guard out of the side guard mount by grasping it at the
top or place finger in the hole and pull it upward. To
replace, place the side guard bracket into the slot
between the side guard mount and the side guard
clamp and push down. See Figure 51.

Adjusting Rigid Side Guards

Tools Needed:
• 1/8” Allen Wrench

You can adjust the “snugness” of the fit of the side
guard bracket in the side guard mount by loosening or
tightening the two Allen Screws in the side guard
mount. See Figure 51.

Either type of rigid side guard can be made “non-
removable” by firmly tightening the two Allen Screws
in the side guard mount while the side guard is

Figure 50
Cloth Side Guard Removal and Replacement

Figure 51
Quad Removable Side Guard (A) and Rigid
Removable Side Guard (B)

A.

B.

CHAPTER 6:

CHAPTER 6:

CHAPTER 6:

CHAPTER 6:

CHAPTER 6: SIDE GU

SIDE GU

SIDE GU

SIDE GU

SIDE GUARDS

ARDS

ARDS

ARDS

ARDS

Back Upholstery Flap

Back Cane

Cloth Side Guard

Side Guard
Clamp

Allen Screws

«
...
52
53
54
55
56
...
»

Summary of Contents for Rigid Aero Z Series







































































































Reviews:

No comments

Related manuals for Rigid Aero Z Series

Brand: Neatech Pages: 52

esprit action4 NG

Brand: Invacare Pages: 32

trotter TR 1200

Brand: Drive Medical Pages: 6

Brand: AAT Pages: 40

Street Warrior Q1-10

Brand: Vitea Care Pages: 68

Brand: Atlas Pages: 9

Brand: Enigma Pages: 11

Brand: Enigma Pages: 13

Brand: Enigma Pages: 16

Brand: Raz Pages: 15

Brand: HOMCOM Pages: 9

Icon JUNIOR Back Support

Brand: VARILITE Pages: 85

Brand: RMS Pages: 20

Brand: RMS Pages: 20

Brand: Safer Locks Pages: 25

Brand: Quantum Pages: 20

Brand: Zippie Pages: 172

Brand: decon Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands