TiLite Rigid Aero Z Series Owner'S Manual Download | Manualshive

Page: 38 / 102

background image

TiLite

®

OM000007 - Rev. B

30

Angle Adjustable High Mount

Footrest

(ZR Series and Aero Z)

Adjusting the Angle of the Footrest

Tools needed:
• 5/32” Allen Wrench
• 7/16” Open End Wrench (no extension tubes)
• 3/16” Allen Wrench (extension tubes only)

1. Loosen, but do not remove, the Allen Screws. See

Figure 11. If your footrest has extension tubes (see
Figure 12), you will have 3/16” Allen Screws in place
of lock nuts and you will only need to loosen these
latter Allen Screws to adjust the angle.

2. Adjust the footrest to the desired angle.
3. Tighten the Allen Screws and locknuts (or 3/16”

Allen Screws), making sure the screws and the
locknuts (or 3/16” Allen Screws) are secure and will
not permit the footplate to move up or down under
your weight.

Replacing or Adjusting the Height of the

Footrest

The Angle Adjustable High Mount Footrest for the ZR
Series wheelchairs can be replaced or the height
adjusted by using the tools and following the
procedures under “Titanium Footrest with Flat ABS
Cover (ZR Series)” on

pages 26-27.

The Angle Adjustable High Mount Footrest for the
Aero Z wheelchair can be replaced or the height
adjusted by using the tools and following the
procedures under “Titanium Footrest with Flat ABS
Cover (Aero Z)” on page 27.

1-Piece Angle Adjustable Rigid

(High Mount) Footrests

(YG)

The angle of the 1-Piece Angle Adjustable Rigid
Footrest (see Figure 8) and of the 1-Piece Angle
Adjustable Rigid High Mount Footrest (see Figures 9
and 10), can be adjusted by using the tools and
following the procedures under “Angle Adjustable
Footrest (TR Series, YR Series, ZR Series, Aero Z,
BB and Evo)” on page 28.

The 1-Piece Angle Adjustable Rigid Footrest (see
Figure 8) can be replaced or the height adjusted by
using the tools and following the procedures under
“Titanium Footrest with Flat ABS Cover (TR, YR, and
BB)” on page 25.

The 1-Piece Angle Adjustable High Mount Footrest
(see Figures 9 and 10) can be replaced or the height
adjusted by using the tools and following the
procedures under “Angle Adjustable High Mount
Footrest (TR Series, YR Series and Evo)” on pages
28-29.

Figure 13
YG Flip-Up Footrests

A. Flip-Up
B. Angle Adjustable Flip-Up
C. Depth Adjustable Flip-Up
D. Depth & Angle Adjustable Flip-Up

Figure 14
Adjusting/Replacing YG Series Flip-Up Footrests

Binder

Clamp

Snap Button

Frame

Allen Screw

A.

B.

C.

D.

Figure 15
Angle Adjustable Flip Up Footrest Extension

Footrest Assembly

9
8
7
6
5
4
3
2
1

1

2

3

4

5

6

7

8

9

9
8
7
6
5
4
3
2
1

1

2

3

4

5

6

7

8

9

Figure 54

Figure 55

Figure 56

Figure 15

Figure 15

Allen
Screws

Angle Adjustable
Footrest Extension

Footplate

Angle Adjustable
Footrest Mount

«
...
36
37
38
39
40
...
»

Summary of Contents for Rigid Aero Z Series







































































































Reviews:

No comments

Related manuals for Rigid Aero Z Series

Brand: Otto Bock Pages: 32

Brand: Otto Bock Pages: 72

Brand: Otto Bock Pages: 172

Brand: Quantum Rehab Pages: 47

Brand: TiLite Pages: 100

Brand: TiLite Pages: 103

Active wheelchair

Brand: Küschall Pages: 34

Brand: Enigma Pages: 5

Brand: Enigma Pages: 11

Brand: Dietz Pages: 23

TOMTAR Levina 320-2

Brand: Dietz Pages: 32

Brand: Dietz Pages: 36

Brand: Vermeiren Pages: 8

Brand: Vermeiren Pages: 8

L6-P03-15-19/20

Brand: RMS Pages: 2

Brand: Observer Pages: 51

Brand: I-GO Pages: 28

Brand: Quickie Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands