TiLite Rigid Aero Z Series Owner'S Manual Download Page 39 | Manualshive

Page: 39 / 102

background image

TiLite

®

OM000007 - Rev. B

31

Flip-Up Footrest; Angle

Adjustable Flip-Up Footrest;

Depth Adjustable Flip-Up

Footrest; and Depth and Angle

Adjustable Flip-Up Footrest

(YG Series)

If you are unsure which type of flip-up footrest is
installed on your YG Series chair, see Figure 13.
Note: If your YGS chair has 90º hangers (see Figure
19), see “90º Hanger Flip-Up Footrests; 90º Hanger
Depth Adjustable Flip-Up Footrests” on page 33 or
“90º Hanger Depth and Angle Adjustable Flip-Up
Footrests” on pages 33-34.

Replacing or Adjusting the Height of the

Footrest

Tools Needed:
• 3/16” Allen Wrench

1. Loosen the Allen Screw on the binder clamp. See

Figure 14.

2. Depress the snap button and raise or lower the

footrest assembly to the desired height (not less
than 2” of ground clearance), making sure the
snap button pops out through a hole in the frame.

3. If replacing the complete footrest assembly, remove

the footrest assembly completely and reinsert a
new footrest assembly, making sure the snap
button pops out through a hole in the frame.

4. Securely tighten the Allen Screw on the binder

clamp.

Adjusting the Angle of the Footrest

Tools Needed:
• 3/16” Allen Wrench
• 5/32” Allen Wrench

If your flip-up footrest is angle adjustable, you can
adjust the angle as follows:

1. Loosen the two Allen Screws that clamp the angle

adjustable footrest extension to the angle
adjustable footrest mount. See Figure 15.

2. Adjust the angle of the footrest to the desired

angle.

3. Securely tighten the two Allen Screws that clamp

the angle adjustable footrest extension to the
angle adjustable footrest mount, making sure the
teeth on the locking block are properly engaged to
prevent the footrest from moving.

WARNING

The threads on the Allen Screws that secure the angle
adjustable footrest extension to the angle adjustable
footrest mount have been treated with a medium
strength threadlock to reduce the possibility they will
become loose. You should be able to adjust the angle of

Figure 17
YG High Mount Flip-Up Footrests

A. High Mount Flip-Up
B. Angle Adjustable High Mount Flip-Up
C. Depth Adjustable High Mount Flip-Up
D. Depth & Angle Adjustable High Mount Flip-Up

Figure 18
Height Adjustments on YG Series High Mount
Flip-Up Footrests

Figure 16
Depth Adjustments on YG Series Flip-Up Footrests

A.

B.

C.

D.

Figure 18

Footplate

Allen
Screws

Locknuts

Flip-Up
Footrest
Pivot

Frame

Allen
Screws

High Mount
Extension
Tube

Footrest
Extension
Clamp

«
...
37
38
39
40
41
...
»

Summary of Contents for Rigid Aero Z Series







































































































Reviews:

No comments

Related manuals for Rigid Aero Z Series

Brand: Foldawheel Pages: 12

Senior Seating P530

Brand: Hill-Rom Pages: 91

Brand: Motion Composites Pages: 24

Brand: PDG Mobility Pages: 14

Brand: Royale Pages: 3

Brand: HMN Pages: 12

Jaco Rehab Edition

Brand: Kinova Pages: 31

Brand: Vermeiren Pages: 168

Brand: WARDRAY PREMISE Pages: 15

Brand: Quantum Rehab Pages: 2

Brand: identités Pages: 16

146-STD22ECDDA-SF

Brand: McKesson Pages: 2

Pyro Start Plus

Brand: B+B Pages: 23

Brand: B+B Pages: 67

Brand: B+B Pages: 62

Brand: B+B Pages: 63

Brand: B+B Pages: 67

Brand: Alber Pages: 31

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands