TiLite Rigid Aero Z Series Owner'S Manual Download Page 41 | Manualshive

Page: 41 / 102

background image

TiLite

®

OM000007 - Rev. B

33

Adjusting the Angle or Depth of the

Footrest

If your high mount flip-up footrest is angle or depth
adjustable or both, you can adjust the angle or depth
by using the tools and following the procedures for
adjusting the angle or depth of a flip-up footrest as set
forth under “Flip-Up Footrest; Angle Adjustable Flip-
Up Footrest; Depth Adjustable Flip-Up Footrest; and
Depth and Angle Adjustable Flip-Up Footrest” on

pages 31-32

.

90º Hanger Flip-Up Footrests; 90º

Hanger Depth Adjustable Flip-Up

Footrests

(YGS)

Replacing, or Adjusting the Height of, the

Flip-Up or Depth Adjustable Flip-Up

Footrest

Tools Needed:
• 5/32” Allen Wrench
• 7/16” Open End Wrench

1. Remove the Allen Screw that secures the footplate

bracket to the frame. See Figures 20 or 21. Make
sure to note the order in which you remove the
various washers and nuts when removing the Allen
Screw.

2. Reposition the existing (or replacement) footrest

assembly to the desired height (not less than 2” of
ground clearance), lining up the hole in the footplate
bracket with a hole in the frame.

3. Reinsert the Allen Screw through the 1/2” washer,

footplate bracket, the 1” concave washer, the frame,
the second 1” concave washer, the second 1/2”
washer and the lock nut. Securely tighten.

Adjusting the Depth of the Footrest

Tools Needed:
• 5/32” Allen Wrench
• 7/16” Open End Wrench

1. Remove the two Allen Screws and locknuts that

secure the footplate to the angle adjustable footrest
bracket. See Figure 21.

2. Reposition the footplate to the desired depth.
3. Reinsert and securely tighten the two Allen Screws

and locknuts .

90º Hanger Depth and Angle

Adjustable Flip-Up Footrests

(YGS)

Replacing, or Adjusting the Height of, the

Footrest

Tools Needed:
• 5/32” Allen Wrench
• 7/16” Open End Wrench

Figure 21
YGS 90º Hanger Depth Adjustable Flip-Up
Footrest

Figure 23

Figure 24

Figure 22

Figure 21

Frame

Footplate

Allen Screws

Footplate
Bracket

Allen Screw

«
...
39
40
41
42
43
...
»

Summary of Contents for Rigid Aero Z Series







































































































Reviews:

No comments

Related manuals for Rigid Aero Z Series

Brand: Jenx Pages: 24

Brand: Pandhora Pages: 72

Brand: Todo Pages: 43

Brand: AAT Pages: 40

Brand: progeo Pages: 56

Brand: Blumil Pages: 12

Brand: Motion Composites Pages: 28

Brand: Handicare Pages: 40

WHEELCHAIR Series

Brand: Paravan Pages: 160

Brand: Invacare Pages: 76

1 612 iCHAIR MC3 27

Brand: Meyra Pages: 12

Brand: B+B Pages: 38

Brand: B+B Pages: 71

Brand: B+B Pages: 78

Brand: Zinger Pages: 2

Brand: SORG Pages: 40

Brand: Netti Pages: 16

Dynamic System Leg support

Brand: Netti Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands