TiLite Rigid Aero Z Series Owner'S Manual Download Page 44 | Manualshive

Page: 44 / 102

background image

TiLite

®

OM000007 - Rev. B

36

Adjusting if there is “Play” in the Backrest

or Backrest Bracket

Tools Needed:
• 7/16" End Wrench
• 5/32" Allen Wrench
• 1/8” Allen Wrench
• 3/8” Open End Wrench

If the backrest or backrest bracket becomes loose or
there is “play” in the folding backrest assembly, follow
these procedures:

1. On both sides of the chair, tighten both Allen

Screws shown in Figure 27.

2. Repeat this procedure until there is no “play” in the

folding backrest assembly.

3. Do not overtighten the “pivot” screw or the backrest

will not fold/unfold.

Changing the Backrest Angle

Tools Needed:
• 7/16" End Wrench
• 5/32" Allen Wrench
• 1/8” Allen Wrench

1. Lock the backrest in the unfolded position.
2. On both sides of the chair, loosen, but do not

remove, the two Allen Screws that attach the
backrest to the backrest bracket. See Figure 28.

3. On both sides of the chair, completely remove the

link screw that attaches the link to the backrest
bracket.

4. Keeping the backrest bracket locked in the unfolded

position, tilt the backrest forward or backward to the
desired angle.

5. On one side of the chair, line up the hole in the link

with the closest available threaded hole in the
backrest bracket. It may be necessary to make a
minor adjustment to the backrest angle in order to
properly align the hole in the link with an available
threaded hole in the backrest bracket. Once
aligned, reinsert and fully tighten the link screw
removed in step 3 to securely attach the link to the
backrest assembly.

6. On the opposite side of the chair, attach the link to

the backrest bracket using the corresponding
threaded hole in the backrest bracket using the link
screw removed in step 3.

7. On both sides of the chair, securely tighten the Allen

Screws that were loosened in step 2.

Figure 28
Adjusting the Backrest Angle

Figure 27
Adjusting for “play” in the Backrest Bracket

Allen
Screws

Backrest Bracket

Pivot Screw

Backrest

Link

Link Screw

Backrest Bracket

Allen

Screws

Backrest

Threaded
Holes

«
...
42
43
44
45
46
...
»

Summary of Contents for Rigid Aero Z Series







































































































Reviews:

No comments

Related manuals for Rigid Aero Z Series

Brand: Handicare Pages: 12

Brand: ubiolabs Pages: 95

Brand: Plusmed Pages: 2

Extra Large Fold-a-Way Spring

Brand: Tendercare Pages: 17

Brand: Permobil Pages: 24

Brand: Permobil Pages: 31

Comfort Cushions ACTA-EMBRACE

Brand: Permobil Pages: 48

Brand: Roma Sport Pages: 8

Brand: RHYTHM Pages: 2

Brand: Küschall Pages: 44

Brand: Küschall Pages: 60

Brand: FORTA Pages: 16

Shower Chair Series

Brand: NRS Healthcare Pages: 2

Brand: Borringia Pages: 26

Brand: You-Q Pages: 57

Brand: Making Life Easy Pages: 2

Quick Release Amputee Support

Brand: Comfort Company Pages: 2

Lille Viking 2000+

Brand: Etac Pages: 60

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands