TiLite Rigid Aero Z Series Owner'S Manual Download Page 30 | Manualshive

Page: 30 / 102

background image

TiLite

®

OM000007 - Rev. B

22

Inspection Item

Initially

Weekly 3 Months

Inspect wheel/fork assembly/stem bolt to ensure that
stem bolt is secure (wheel/fork assembly should not have
excessive play relative to the stem bolt but should rotate
freely); if necessary, tighten stem bolt

Ensure that wheel bearings are clean and free from

moisture

If pneumatic, check for proper inflation as per the
sidewall (under-inflation will increase rolling
resistance and will prevent wheel locks from properly en-
gaging; and over-inflation may cause a tire to explode

Armrests

Inspect to ensure that all hardware is securely attached

Footrests

Inspect to ensure that all hardware is securely attached

Anti-tips

Inspect anti-tip wheel for cracks and wear

Inspect to ensure that anti-tip receptacle is securely

attached

Frame

Inspect for cracks

Cleaning

Cleaning

Cleaning

Cleaning

Cleaning

Clean your chair regularly. Cleaning often will reveal loose or worn parts and enhance the smooth
operation of your chair.

Cleaning the F

Cleaning the F

Cleaning the F

Cleaning the F

Cleaning the Frrrrrame

ame

ame

ame

ame

1. If your titanium frame came with a “Satin” finish, use a soft cloth to clean the finish. If necessary,

moisten the cloth with glass cleaner. If the “Satin” finish of your chair becomes scratched, you
can buff out the scratch using a Scotch Brite™ pad. Moisten the pad with water and rub it over
the scratch in a circular motion. After buffing, wipe off the buffed area using a soft cloth
moistened with glass cleaner or wood furniture polish. Note: Do NOT use a Scotch Brite™ pad
on the logo, and NEVER use steel wool to clean your frame.

2. If your titanium chair came with a “Polished” finish, use a soft cloth to clean the finish. If

necessary, moisten the cloth with glass cleaner. Note: NEVER use Scotch Brite™ pads or steel
wool on a polished frame.

3. If your chair has a painted aluminum frame, use a soft clean cloth with soap and water to clean

the frame. Immediately dry all components and parts that become wet. Note: Do NOT use
Scotch Brite™ pads, steel wool, abrasive cleaners or petroleum-derived products to clean a
painted aluminum frame.

Cleaning the Upholster

Cleaning the Upholster

Cleaning the Upholster

Cleaning the Upholster

Cleaning the Upholsteryyyyy

1. Regularly hand-wash the seat sling and back upholstery using water and a mild detergent.

Always air dry the upholstery.

2. NEVER machine wash the upholstery, and NEVER machine dry the upholstery.
3. When washing the upholstery, carefully check for sagging, rips or tears. If you find any rips or

tears, you MUST order new upholstery.

4. After washing the seat sling, always check the tension while seated in the chair to ensure the

sling does not touch the cross tube beneath the seat sling.

«
...
28
29
30
31
32
...
»

Summary of Contents for Rigid Aero Z Series







































































































Reviews:

No comments

Related manuals for Rigid Aero Z Series

Brand: Meya Pages: 80

GUARDIAN G2-105RX1

Brand: Medline Pages: 8

Brand: Pride Mobility Pages: 47

trotter TR 1200

Brand: Drive Medical Pages: 6

Brand: Pride Mobility Pages: 2

Brand: Drive Medical Pages: 2

Brand: Handicare Pages: 88

Brand: Küschall Pages: 26

Brand: Z-Tec Pages: 4

Brand: RMS Pages: 14

Brand: Safer Locks Pages: 25

Brand: Skil-Care Pages: 2

Brand: JDY Imports Pages: 26

Brand: Quickie Pages: 32

Brand: Karma Pages: 84

Brand: REHASHOP Pages: 19

Brand: Neatech Pages: 136

Brand: Vermeiren Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands