TiLite Rigid Aero Z Series Owner'S Manual Download | Manualshive

Page: 45 / 102

background image

TiLite

®

OM000007 - Rev. B

37

Adjusting the Backrest Height

Tools Needed:
• 5/32" Allen Wrench

Note: In order to adjust the backrest height you will
have to remove the backrest upholstery. Therefore,
make a note of the tautness of the backrest
upholstery before removing it so you can reinstall it to
approximately the same degree of tautness.

1. Remove the backrest upholstery, including the two

fastening flaps. See “Velcro Adjustable Back
Upholstery” or “Tension Adjustable by Straps Back
Upholstery” on pages 49-51.

2. On both sides of the chair, remove the Allen Screw

that secures the backrest post inserts inside the
backrest post. See Figure 29.

3. Reposition both backrest post inserts to the desired

height inside the backrest posts, making sure to
align the holes in the backrest post inserts with the
holes in the backrest posts.

4. Make sure both backrest post inserts are at the

same height in the backrest posts and reinsert and
securely tighten the two Allen Screws.

5. Reinstall the back upholstery, including the two

fastening flaps, and adjust the upholstery to the
desired tautness. See “Velcro Adjustable Back
Upholstery” or “Tension Adjustable by Straps Back
Upholstery” on pages 49-51.

WARNING

The threads on the Allen Screws that secure the
backrest posts to the backrest post inserts have been
treated with a medium strength threadlock to reduce the
possibility that they will become loose. You should be
able to adjust the backrest height two or three times
without reapplying threadlock to these screws. If you
repeatedly adjust the backrest height, TiLite requires
that you reapply a medium strength threadlock after
every second adjustment.

Non-Folding Titanium Adjustable

Height Backrest

(BB)

If your chair has a non-folding Titanium Adjustable Height
Backrest, you can adjust the backrest height by using the
tools and following the procedures for adjusting the
backrest height under “Adjustable Height & Angle
Backrest (Titanium or Aluminum)” on pages 35-37.

Non-Folding Fixed Height &

Angle Backrest

(TR, YR and BB)

If your chair has a non-folding Titanium Fixed Height
& Angle Backrest, you cannot adjust the backrest
height or the backrest angle.

Figure 29
Adjusting the Backrest Height

Allen

Screws

Backrest

Post

Insert

Backrest

Post

Push Handle (optional)

Integrated
Push Handle (optional)

«
...
43
44
45
46
47
...
»

Summary of Contents for Rigid Aero Z Series







































































































Reviews:

No comments

Related manuals for Rigid Aero Z Series

Brand: Kartus Pages: 16

Brand: Unwin Pages: 12

Brand: progeo Pages: 48

Brand: Drive DeVilbiss Pages: 2

Brand: EZee Life Pages: 6

Brand: R82 Pages: 9

SWING AWAY AMPUTEE

Brand: Permobil Pages: 8

Ricon K 5500 Series

Brand: Wabtec Pages: 4

Brand: Pride Pages: 40

Brand: Permobil Pages: 32

Brand: Golden Pages: 13

Brand: AAT Pages: 36

Brand: Breezy Pages: 40

Brand: Breezy Pages: 16

LOTUS TRANSPOTER HCM9062F

Brand: Home Care Medical Pages: 5

Occupant Restraints

Brand: Unwin Pages: 24

Greencare Easy 1

Brand: ortho europe Pages: 9

Brand: ortho europe Pages: 50

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands